High Strain Rate Properties of Various Forms of Ti6Al4V(ELI) Produced by Direct Metal Laser Sintering

dc.contributor.authorMuiruri, Amos
dc.contributor.authorMaringa, Maina
dc.contributor.authordu Preez,Willie
dc.date.accessioned2026-10-29T11:43:54Z
dc.date.issued2012-08-29
dc.description.abstractFor analysis of engineering structural materials to withstand harsh environmental con￾ditions, accurate knowledge of properties such as flow stress and failure over conditions of highstrain rate and temperature plays an essential role. Such properties of additively manufacturedTi6Al4V(ELI) are not adequately studied. This paper documents an investigation of the high strainrate and temperature properties of different forms of heat-treated Ti6Al4V(ELI) samples produced bythe direct metal laser sintering (DMLS). The microstructure and texture of the heat-treated sampleswere analysed using a scanning electron microscope (SEM) equipped with an electron backscatterdiffraction detector for electron backscatter diffraction (EBSD) analysis. The split Hopkinson pressurebar (SHPB) equipment was used to carry out tests at strain rates of 750, 1500 and 2450 s−1, andtemperatures of 25, 200 and 500 ◦C. The heat-treated samples of DMLS Ti6Al4V(ELI) alloys testedhere were found to be sensitive to strain rate and temperature. At most strain rates and temperatures,the samples with finer microstructure exhibited higher dynamic strength and lower strain, while thedynamic strength and strain were lower and higher, respectively, for samples with coarse microstruc￾ture. The cut surfaces of the samples tested were characterised by a network of well-formed adiabaticshear bands (ASBs) with cracks propagating along them. The thickness of these ASBs varied with thestrain rate, temperature, and various alloy forms.
dc.identifier.citationMuiruri, A.; Maringa, M.; du Preez, W. High Strain Rate Properties of Various Forms of Ti6Al4V(ELI) Produced by Direct Metal Laser Sintering. Appl. Sci. 2021, 11, 8005. https://doi.org/10.3390/ app11178005
dc.identifier.doihttps://doi.org/10.3390/ app11178005
dc.identifier.urihttps://repository.mut.ac.ke/handle/123456789/7108
dc.language.isoen
dc.publisherapplied sciences
dc.subjectdirect laser metal sintering
dc.subjectTi6Al4V(ELI)
dc.subjectSHPB
dc.subjecthigh strain rate
dc.subjectflow stress
dc.subjectfracture strain
dc.subjectadiabatic shear band
dc.titleHigh Strain Rate Properties of Various Forms of Ti6Al4V(ELI) Produced by Direct Metal Laser Sintering
dc.typeArticle
oaire.citation.endPage26
oaire.citation.issue8005
oaire.citation.startPage2
oaire.citation.titleApplied sciences
oaire.citation.volume11

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
High Strain Rate Properties of Various Forms of Ti6Al4V.pdf
Size:
14.85 MB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
2.06 KB
Format:
Item-specific license agreed upon to submission
Description: