Article 2012 MUT Institutional Repository

High Strain Rate Properties of Various Forms of Ti6Al4V(ELI) Produced by Direct Metal Laser Sintering

Loading...
Thumbnail Image

Journal Title

Journal ISSN

Volume Title

Publisher

applied sciences

Abstract

For analysis of engineering structural materials to withstand harsh environmental con￾ditions, accurate knowledge of properties such as flow stress and failure over conditions of highstrain rate and temperature plays an essential role. Such properties of additively manufacturedTi6Al4V(ELI) are not adequately studied. This paper documents an investigation of the high strainrate and temperature properties of different forms of heat-treated Ti6Al4V(ELI) samples produced bythe direct metal laser sintering (DMLS). The microstructure and texture of the heat-treated sampleswere analysed using a scanning electron microscope (SEM) equipped with an electron backscatterdiffraction detector for electron backscatter diffraction (EBSD) analysis. The split Hopkinson pressurebar (SHPB) equipment was used to carry out tests at strain rates of 750, 1500 and 2450 s−1, andtemperatures of 25, 200 and 500 ◦C. The heat-treated samples of DMLS Ti6Al4V(ELI) alloys testedhere were found to be sensitive to strain rate and temperature. At most strain rates and temperatures,the samples with finer microstructure exhibited higher dynamic strength and lower strain, while thedynamic strength and strain were lower and higher, respectively, for samples with coarse microstruc￾ture. The cut surfaces of the samples tested were characterised by a network of well-formed adiabaticshear bands (ASBs) with cracks propagating along them. The thickness of these ASBs varied with thestrain rate, temperature, and various alloy forms.

Description

Keywords

direct laser metal sintering, Ti6Al4V(ELI), SHPB, high strain rate, flow stress, fracture strain, adiabatic shear band

Publication Details

Journal
Applied sciences
Volume
11
Issue
8005
Pages
2 –26

Citation

Muiruri, A.; Maringa, M.; du Preez, W. High Strain Rate Properties of Various Forms of Ti6Al4V(ELI) Produced by Direct Metal Laser Sintering. Appl. Sci. 2021, 11, 8005. https://doi.org/10.3390/ app11178005

Endorsement

Review

Supplemented By

Referenced By