Article 2023 MUT Institutional Repository

Numerical Simulation of the Taylor Impact Test for Laser Powder Bed Fusion Parts Based on Microstructural Internal State Variables

Abstract

The response of any engineering design components to stresses should be predictable,While the response of a material to complex loading, such as high strain rates experienced duringservice, is difficult to represent with simple tests, the Taylor impact test is one of a number of testsdevised for high strain rate complex loading. To expedite the acceptance of LPBF Ti6Al4V (ELI) foruse in demanding structural applications, there is a need to develop numerical models based on theinternal microstructural state variables to predict the performance of the alloy over a wide range ofhigh strain rates using such complex tests. This paper documents the numerical simulation of Taylorimpact tests for direct metal laser-sintered and post-processed Ti6Al4V (ELI—Extra Low Interstitial)alloy. A microstructural variable-based constitutive model was used to predict the mechanicalproperties (stresses and evolution of plastic strains) of the material. The corresponding materialparameters of the model were based on the specific microstructure obtained upon post-process heattreatment. The model was first implemented as a user material subroutine in the explicit finiteelement program ABAQUS using the VUHARD subroutine. Subsequently, the symmetrical Taylorimpact tests of Laser Powder Bed Fusion (LPBF) Ti6Al4V (ELI) parts were numerically simulatedusing the VUHARD subroutine at different impact velocities. The equivalent von Mises stress andplastic strain obtained from numerical simulations were compared with the analytical solutions basedon the strain rates obtained. It was shown that the instantaneous and average absolute errors betweenthe numerical and analytical values of the model were generally less than 5%. The mushroom end,commonly observed in a Taylor test specimen, was also seen in the numerical model.

Description

Keywords

Ti6Al4V (ELI), subroutine, VUHARD, ABAQUS, high strain rate, simulation

Publication Details

Journal
Applied sciences
Volume
13
Issue
5372
Pages
1 –11

Citation

Muiruri, A.; Maringa, M.; du Preez, W. Numerical Simulation of the Taylor Impact Test for Laser Powder Bed Fusion Parts Based on Microstructural Internal State Variables. Appl. Sci. 2023, 13, 5372. https://doi.org/10.3390/app13095372

Endorsement

Review

Supplemented By

Referenced By