Article 2020 MUT Institutional Repository
Effect of Stress-Relieving Heat Treatment on the High Strain Rate Dynamic Compressive Properties of Additively Manufactured Ti6Al4V (ELI)
Abstract
A study was undertaken on the compressive high strain rate properties and deformationbehaviour of Direct Metal Laser-Sintered (DMLS) Ti6Al4V (ELI) parts in two separate forms: as-built(AB) and stress relieved (SR). The high strain rate compression tests were carried out using a SplitHopkinson Pressure Bar test system at ambient temperature. The average plastic strain rates attainedby the system were 400 s−1 and 700 s−1. Comparative analyses of the performance (flow stresses andfracture strains) of AB and SR specimens were carried out based on the results obtained at these twoplastic strain rates. Microstructural analyses were performed to study the failure mechanisms of thedeformed specimens and fracture surfaces. Vickers microhardness test values were obtained beforeand after high strain rate compression testing. The results obtained in both cases showed the strainrate sensitivity of the stress-relieved samples to be higher in comparison to those of as-built ones,at the same value of true strain.
Description
Keywords
direct metal laser sintering, Ti6Al4V (ELI), dynamic properties, Split Hopkinson Pressure Bar, flow stress, fracture strain
Publication Details
Journal
Metals
Volume
10
Issue
653
Pages
1 –19
