Quasi-static crushing of DMLS-produced Ti6Al4V hierarchical honeycombs

dc.contributor.authorChibinyani, M.I.
dc.contributor.authorDzogbewu, T.C.
dc.contributor.authorMaringa, Maina
dc.contributor.authorMuiruri, Amos
dc.date.accessioned2026-10-29T13:12:09Z
dc.date.issued2025-10-20
dc.description.abstractHoneycombs excel at absorbing energy during quasi-static crushing events. Adding hierarchical structures to these designs improves their effectiveness. Hierarchical structures are best built using additive manufacturing technologies. There is, however, limited experimental data on their crush-resistance. This renders it difficult to improve and validate current theoretical and numerical models on the deformation behaviour of hierarchical honeycombs. This study aims to design vertex-based hierarchical honeycombs and examine their surface quality and mechanical behaviour for quasi-static crushing scenarios. Zero-, first-, and second-order hierarchical hon￾eycombs were designed and fabricated using direct metal laser sintering technology. The Ti6Al4V specimens were quasi-statically crushed using the MTS CriterionTM, Model 43 universal testing machine to evaluate the deformation behaviour of honeycomb topologies with different levels of hierarchy. Surface roughness analysis revealed that the average surface roughness (Ra) increased with the order of hierarchy, with lower Ra values on top flat surfaces compared to side inclined surfaces. Mechanical testing showed deformation occurred primarily through beam bending, with pronounced buckling under y-direction loading. The load drop after peak values was attributed to fracture at the vertices of the walls. The sequential collapse of the hierarchical honeycombs under compression began with the lowest order of hierarchy, involving bending, buckling, Poisson’s ratio lateral expansion, and sliding along inclined and horizontal lines. Zero-order hierarchical honeycombs exhibited the lowest failure loads, while second-order hierarchical honeycombs had the highest. The design-to-experiment test approach was employed to predict the performance benefits of hierarchical honeycombs, providing valuable insights and highlighting design limitations to address crash-worthy additively manufactured hierarchical lattice structures.
dc.identifier.doihttps://doi.org/10.1016/j.matdes.2025.114993
dc.identifier.urihttps://repository.mut.ac.ke/handle/123456789/7116
dc.language.isoen
dc.publisherMaterials & Design
dc.subjectLattice structures Hierarchical honeycombs Additive manufacturing Surface roughness Supports In-plane loading Energy absorption
dc.titleQuasi-static crushing of DMLS-produced Ti6Al4V hierarchical honeycombs
dc.typeArticle
oaire.citation.endPage23
oaire.citation.issue114993
oaire.citation.startPage1
oaire.citation.titleMaterials & Design
oaire.citation.volume260 (2025)

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Quasi-static crushing of DMLS-produced Ti6Al4V hierarchical honeycombs.pdf
Size:
26.59 MB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
2.06 KB
Format:
Item-specific license agreed upon to submission
Description: