Search
Now showing items 21-30 of 45
DSTATCOM Application for Distribution Network Power Quality Enhancement: A Review
(IEEE, 2021-09)
The performance of electrical systems is becoming more affected by the increased voltage drop, power loss, and power quality problems. These issues can be drastically minimized by the incorporation of compensators in the ...
A Voltage Stability Constrained Optimal Power Flow using Multi-objective Particle Swarm Optimization Algorithm
(2021-11)
As the global demand for energy rises, power system networks are teetering on the verge of collapsing owing to a compromise in system stability. During system disturbances, the network's inability to supply adequate reactive ...
Comparative analysis of SCIG and DFIG based wind generation on transient stability of the Kenyan power system
(2014)
Generation of Electrical power from wind is achieved using the two mainly available generator technologies. These technologies are the squirrel cage induction generators (SCIG) and doubly fed induction generators (DFIGs). ...
Investigating the impact of power system stabilizers in a multi machine system with an induction motor load
(2010)
The high reactive power demand by the induction motor load during fault condition due to reduced bus voltages may cause a generator to behave like a voltage source behind the synchronous reactance and its terminal voltage ...
Load flow analysis with a neuro-fuzzy model of an induction motor load
(2009)
In the conventional load flow study, the active and reactive powers of all load buses are generally specified. Although the constant power model is applicable for approximate studies, it may not suitable for the motors ...
Optimal Placement of FACTS devices using voltage Stability Indices
(2016)
Power System Voltage stability remains a major challenge for power utilities across the world. This research uses static load flow methods namely the voltage stability indices to come up with an optimal placement of FACTS ...
Power factory load flow sensitivity analysis of an induction motor load model
(2010)
Power factory Load flow sensitivity is a method used to obtain certain relationship between dependent and independent variables using differential relationship among physical measure in systems. Voltage sensitivity analysis ...
Voltage stability analysis using CP_ANN and optimized capacitor bank placement
(2010)
Voltage Stability refers to the ability of power system to maintain steady voltage at all buses in the system after being subjected to a disturbance from a given initial operating condition. In this paper, the IEEE 30-bus ...
Shore to ship power for Mombasa port possibilities and challenges
(2016)
Control of air pollution from docked ships is one challenge that ports encounter in their effort to reduce operational environmental impact. Ship-to-shore power has been identified as one technology to reduce emissions by ...
Optimal Battery Location for Minimizing the Total Cost of Generation in a Power System
(2020)
Wind is one of the major and fast growing source of green energy in the world. However, it’s naturally variable and this reduces its percentage penetration in a power system
because of costs associated with balancing ...